Panasonic VIERA TC-L32X30 Owner's Manual page 47

Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in "Channel surf mode"(p. 52)
Select "Edit"
Select the item to edit
Favorite
Caption Add
R G
Proceed to
_next page
Go back to the previous
page
÷ Caption:
Changes the station
identifier
÷ Favorite:
Registers channels to the
Favorite List
÷ Add:
Adds or skips channels
Edit
® Caption
RETURN
Select or edit the station identifier.
(maximum 7 characters available)
® Favorite
I Set favorite I Select the number
® Add
, RETURN
Press OK to select "Yes (add)" or "No (skip)" '_ @
@ Move the cursor to a channel number
_5_ Select "Apply"
To cancel the Edit
)select
) next
Check the signal strength if interference is found or freezing occurs on a digital image.
_Em_ °r
channel
/OK
intensity
® If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
® Not available if "Cable" is selected in "ANT in" (see p. 46).
® Available only for digital antenna channels.
@
Frl
{:3..
m.
I
47
rz.
tc_L32_x30_eng Oa92.indb 47 2011/01/05 11:22:4;
I