Apply Factory Settings; Wall Mount - Philips CSS2133B/F7 User Manual

Apply factory settings

You can reset your SoundBar to the default
settings programmed at the factory.
1
Press BASS+, VOL-, and Treble+ within
three seconds.
» When the factory settings restore is
complete, the SoundBar automatically
switches off and restarts.

5 Wall mount

Note
•
Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
•
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
•
Before wall mount, you need not remove the two
rubber feet at the bottom of the SoundBar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
3-4mm
> 25mm
For information about how to wall mount your
SoundBar, see the quick start guide.
4mm
EN 13