Table of Contents
Advertisement
» When night mode is turned off, the
MUSIC iLINK indicator on the front
panel blinks twice.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
Play music
1
Connect the MP3 player to the SoundBar
as described in the Quick start guide.
2
Press MUSIC iLINK.
» MUSIC iLINK indicator on the front
panel lights up.
3
Press the buttons on the MP3 player to
select and play audio files or music.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your SoundBar speakers.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 3.0 + EDR.
•
The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Bluetooth on the remote control
Press
to switch the SoundBar to Bluetooth
mode.
» The
Bluetooth indicator blinks.
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
12
EN
CSS2133B to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
» During connection, the
indicator blinks.
3
Wait until you hear a beep sound from the
SoundBar.
» When the Bluetooth connection
succeeds, and the
indicator lights up.
» If the connection fails, the
indicator blinks continually.
4
Select and play audio files or music on
your Bluetooth device.
•
During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
5
To exit Bluetooth, select other source.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your SoundBar with another
Bluetooth device, press and hold
remote control to disconnect the currently connected
Bluetooth device.
•
Philips does not guarantee 100% compatibility with all
Bluetooth devices.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
•
no source button is pressed for 30
minutes, and
•
no audio playback is detected from a
connected device.
Bluetooth
Bluetooth
Bluetooth
Bluetooth on the
Hide quick links:
Advertisement
Table of Contents
