Dell 2350D User Manual page 29

1. From the menu list, use the Arrow buttons
2. Press the Select button
3. Press the Right Arrow button
the Select button
4. Use the Arrow buttons
5. When the setting you want appears on the display, press the Select button
Parallel Mode Main Menu
From this You can:
menu:
PCL Set the printer to automatically switch to PCL emulation when a print job
SmartSwitch requires it, regardless of the default printer language.
On*
Off
PS Set the printer to automatically switch to PS emulation when a print job
SmartSwitch requires it, regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer, and query printer status information at the
same time.
Off
Auto*
Parallel Assign a size to the parallel input buffer.
Buffer
Auto*
Disabled
3K to <maximum size allowed> (in 1K increments).
Advanced Enable bidirectional communication through the parallel port.
Status
On*
Off
Protocol Specify the parallel interface protocol.
Receive information at a much higher transmission rate if the printer is set
* Factory default setting
.
until the heading you want appears on the display, and then press
.
to scroll through the available menu items.
to scroll the Parallel menu.
to save the setting.