Dell 2350D User Manual page 23

From You can:
this
menu:
NOTE:
maximum height allowed.
NOTE:
increased in 0.01-inch increments.
NOTE:
can be increased in 1-mm increments.
Feed Specify the feed direction of the Universal Paper Size.
Direction
Short Edge*
Long Edge
NOTE: Feed Direction appears only if the longest edge of the media is shorter
than the Maximum Physical Width of the printer.
*Factory default setting
Reports
Mode Mode Main Menu
Reports Menu Settings Page
Device Statistics
Network Setup Page
Profiles List
Print Fonts
Print Directory
Asset Report
1. From the menu list, use the Arrow buttons
2. Press the Select button
3. Press the Right Arrow button
the Select button
4. Use the Arrow buttons
5.
If the height exceeds the maximum, then the printer uses the
14 inches is the US factory default setting. Inches can be
356 mm is the international factory default setting. Millimeters
.
until the heading you want appears on the display, and then press
.
to scroll through the available menu items.
to scroll the Reports menu.