Panasonic Viera TX-P42X50B Operating Instructions Manual page 78

Message
This timer will not follow the
TV Guide information.
Press OK to continue, RETURN
to restore original timer.
Timer already expired !
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN
to edit.
Tuner Locked
Press EXIT to unlock and stop
recording
Unable to download, please
check equipment
■
Media Player / Network
Message
Cannot read file
Ethernet cable not connected
No Device Inserted
No valid file to play
This operation is not possible
78
●
If you edit the start time or end time of Guide link programming by more than
10 minutes, it will no longer be performed as Guide link programming. The
programming will be performed according to the time setting.
● The starting time in Timer Programming has already passed. Set the timer
correctly (p. 42).
●
Set the start and end times in Timer Programming correctly (p. 42).
●
Timer programming events are overlapped. Press the OK button to keep the
overlapped setting. [Ext Rec.] is given priority over [Reminder]. When two or
more [Ext Rec.] overlap, the first timer programming event starts and finishes
as programmed. The next timer programming event can then start.
●
If you want to unlock the tuner, cancel Direct TV Recording (p. 61, 63) or the
recording of Timer Programming (p. 42).
●
The tape or disc is active. Stop the equipment and try again.
● The file is broken or unreadable. Check applicable data format. (p. 70)
● Check the connection of the LAN cable. If you use a hub, also check the light
on the hub is lit.
●
The LAN cable might be defective.
●
Confirm the SD Card or USB device is inserted correctly.
●
The card has no data.
●
The selected operation is not available.
Meaning / Action
Meaning / Action