Yamaha NP-V80 Owner's Manual page 78

Saving and Loading Data (NP-V80 Only)
This section describes operation of the
file control functions after you have
engaged the file control function mode.
Messages may appear on the display during file
control procedures to aid in smooth operation. Refer
to the Message List on page 83 for details.
NOTE
• No sound will be produced if the keyboard is played while the
file control display is showing, and only buttons related to file
control operations will be active.
NOTE
• The file control display will not appear during:
• Style or song playback.
• Lessons.
• USB flash memory read operations.
Basic File Operation
If multiple files are available for selection, use the
dial to select the desired file.
Press the [0] button to confirm the selection. The [0]
button also executes the selected function. The [-]
button cancels the selected function.
• Cancel
78
Owner's Manual
• Confirm file selection
• Execute
Format a USB Flash Memory
USB flash memory devices must be properly format-
ted before they can be used with this instrument.
NOTICE
• If a USB flash memory that contains data is formatted as
described below, the data will be erased. Make sure that a
USB flash memory to be formatted contains no important
data before carrying out the formatting procedure.
USB flash memory save, delete, and format opera-
tions can only be performed when the instrument is
being powered from an AC adapter. These operations
cannot be performed using battery power.
1
Select the Format function.
Press the category [ ] or [ ] button as many
times as necessary until the "Format?" function
appears.
Format?
2
Execute the Format function.
Press the [0] button. A confirmation message will
appear. Press the [0] button a second time to exe-
cute the Format operation, or press the [-] button
to cancel the operation.
NOTICE
• The Format operation cannot be cancelled during
execution. Never turn off the power or disconnect the
USB flash memory during formatting.
Wait until a message indicating completion of the
formatting operation appears.
3
Exit from the file control function mode.
Press the [VOICE], [STYLE], [SONG], [FUNC-
TION], or [GRAND PIANO] button.