Table of Contents
Advertisement
Holding the arpeggio Playback
Arpeggio playback can be made to continue after the
note has been released by pressing a footswitch con-
nected to the SUSTAIN jack. Arpeggio playback will
stop when the footswitch is released. Connect a foot-
switch (page 11), then assign the function to the foot-
switch as per the instructions below.
1
Press the [FUNCTION] button.
2
Press the CATEGORY [
tons as many times as necessary to
select "Pdl Func" .
"Pdl Func" will appear in the display for a few
seconds, then the currently selected function
assigned to the footswitch will be displayed.
Pdl Func
Sustain
3
Use the dial to select "Arp Hold" .
Arp Hold
If you want to restore the footswitch function to
sustain, select "Sustain". If you want to use both
hold and sustain functions, select "Hold+Sus".
The sustain function affects the main and dual
voices only. Split voices will not be affected.
] and [
] but-
1
The function currently
assigned to the footswitch.
2
Arpeggio Settings (NP-V80 only)
Owner's Manual
61
Advertisement
Table of Contents
