The Functions; Selecting And Setting Functions - Yamaha NP-V80 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters for tun-
ing, setting the split point, and adjusting the voices and effects. Take a look at the func-
tion list starting on the opposite page.
When you locate a function you want to set up, simply select the function's display
name (shown to the right of the function name in the list) and adjust as required.

Selecting and Setting Functions

1
Find the function you want to set in the
list that begins on pages 74, 75.
2
Press the [FUNCTION] button.
StyleVol
100
3
Select a function.
Press the CATEGORY [ ] and [ ] buttons as
many times as necessary until the function's dis-
play name appears in the display.
Transpos
The selected function.
00
4
Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
selected function as required.
In some cases the [+] button will initiate execu-
tion of the selected function, and the [-] will can-
cel the selection.
• Decrement Press simultane-
value by 1. ously to recall the
• NO default setting.
Some Function settings are stored in memory as soon
as they are changed. See "The Backup Parameters" on
page 50 for information on the function settings that
are stored on the instrument.
To restore all initial factor default settings perform the
"Backup Clear" procedure described in the "Initializa-
tion" section on page 50.
Direct
numeric entry.
• Increment
value by 1.
• YES
73
Owner's Manual