Boot Booster - Asus 1000HD - Eee PC Celeron M 900MHz 1GB 120GB 10.1" Netbook XP Home User Manual

User manual
Table of Contents

Advertisement

Boot Booster

The Boot Booster item in BIOS setup helps shorten your Eee PC
bootup time. However, you MUST disable this BIOS item before you
change any Eee PC components or perform system recovery from
the external optical drive. Follow the instructions below to disable
Boot Booster:
1.
Start the system and press <F2> on bootup to show the POST
screen. Press <F2> again to enter the BIOS setup.
If you fail to see the POST screen or enter the BIOS setup by
doing the instruction above, restart the system and try pressing
<F2> repeatedly on bootup.
2.
Set Boot Booster to [Disabled]
Main
Boot Device Priority
Boot Settings Configuration
OnBoard LAN Boot ROM
Boot Booster
Press <F10> to save the configuration and restart Eee PC.
3.
Remember to enable Boot Booster after you complete hardware
change or system recovery.
5-8
Advanced
Security
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Exit
[Enabled]
[Disabled]
Chapter 5: Support DVD & System Recovery
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents