Boot Booster (On Selected Models) - Asus Eee PC 1011CX User Manual

Boot Booster (on selected models)

The Boot Booster item in BIOS setup helps shorten your Eee PC bootup
time. However, you MUST disable this BIOS item before you change any
Eee PC components or perform system recovery (from USB flash disk,
external optical drive or hidden partition). Follow the instructions below to
disable Boot Booster:
Start the system and press <F2> on bootup to show the POST screen.
1.
Press <F2> again to enter the BIOS setup.
2. Set Boot Booster to [Disabled].
If you fail to see the POST screen or enter the BIOS setup by doing
the instruction above, restart the system and try pressing <F2>
repeatedly on bootup.
Main Advanced
Boot Device Priority
Boot Settings Configuration
OnBoard LAN Boot ROM
Boot Booster
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
3. Press <F10> to save the configuration and restart Eee PC.
Remember to enable Boot Booster after you complete hardware
change or system recovery.
ASUS Eee PC
BIOS SETUP UTILITY
Security Boot
[Enabled]
[Disabled]
Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
4-5