Ricoh Aficio MP C305 User Manual page 186

10. Troubleshooting
Message
"Print overrun."
"Printing privileges have not
been set for this document."
"Receiving data failed."
"The selected paper size is
not supported. This job has
been cancelled."
"Sending data failed."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
files."
184
Causes
Images were discarded
while printing.
The PDF document you have
tried to print has no
privileges to print.
Data reception was aborted. Resend the data.
Job Reset is automatically
performed if the specified
paper size is incorrect.
The machine received a
command to stop
transmission from the printer
driver.
The hard disk became full
after a file was stored.
The maximum file capacity
of the Document Server was
exceeded.
Solutions
PCL 5c
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Contact the owner of the document.
Specify the correct paper size, and
then print the file again.
Check if the computer is working
correctly.
Delete the files stored in the Document
Server or reduce the file size to be sent.
Delete the files stored in the Document
Server.