LG 32LC7D Owner's Manual page 91

01. Power (Command2:a)
To control Power On/Off of the TV,
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Data 1 : Power On
Acknowledgement [all ] [Set ID][ ] [OK/NG] [Data] [x]
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
* In this model, TV will send the Acknowledge after
power on processing completion.
* There might be a time delay between command and
acknowledgement.
02. Input Select (Command2:b) (Main Picture Input)
To select input source for the TV.
Transmission[k][b][ ][SetlD][ ][Data][Cr]
Data 0: DTV
Data 1: Analog
Data 2:AV1
Data 3:AV2
Data 4: Component 1
Data 5: Component 2
Data 7: RGB-PC
Data 8:HDMI1/DVI
Data 9:HDMI2
Acknowledgement [b] [ ] [Set ID] [ ] JOKING] [Data] [x]
03. Aspect Ratio (Command2:c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the Option menu.
Transmission [k] [c] [] [set [D] [ ] [Data] [Cr]
Date 1: 4:3 5: Zoom 2
2:16:9 6: Set by program
3: Horizon
4: Zoom 1
Acknowledgement [c][ ] [Set [D][ ] [OK/NG] [Data] [x]
04. Screen Mute (Command2:d)
To select screen mute on/off.
Transmission [k] [d] [ ] [Set ID][ ] [Data] [Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ] [Set ID][ ] [OK/NG] [Data] [x]
05. Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k] [ell ][set [D][ ][Data] [Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowledgement [el [ ] [Set ID] [ ] [OK/NG] [Data] [x]
06.
Volume Control (Command2:f)
To adjust volume.
You can also adjust volume with the volume buffons on
remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 - Max : 64
Refer to 'Real data mapping' as shown below.
Acknowledgement [f] [ ] [Set [D][ ] [OKiNG] [Data] [x]
07.
Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the Video menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 - Max : 64
Refer to 'Real data mapping' as shown below.
Acknowledgement [g] [ ] [Set [D] [ ] [OK/NG] [Data] [x]
08.
Brightness (Command2:h)
To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission [k] [h][ ] [Set ID][ ]]Data] [Cr]
Data Min : 0 - Max : 64(_transmit by Hexadecimal code)
Refer to 'Real data mapping' as shown below.
Acknowledgement [h] [ ] [Set [D][ ] [OKiNG] [Data] [x]
09. Color (Command2:i)
To adjust the screen color.
You can also adjust color in the Video menu.
Transmission [k] [ill ] [Set [D][ ] [Data] [Cr]
Data Min : 0 - Max : 64
Refer to 'Real data mapping' as shown below.
Acknowledgement [i][ ] [set ID] [ ] [OKiNG] [Data] [x]
*Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
* Tint : RSO - G50
* Balance : L50 - R50
m
Z
E_
X
89