Epson EB S6 User Manual page 59

Problem Solving
f Image colors are not right
Check
Do the input signal settings match the signals from the
connected device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
Is the "Contrast g " setting adjusted correctly?
Is the color adjusted correctly?
Are the color saturation and tint adjusted correctly?
Only when projecting images from a video source
Images appear dark
f
Check
Are the image brightness and luminance adjusted correctly?
Is the "Contrast g " setting adjusted correctly?
Is the lamp due for replacement?
Nothing appears on the external monitor (EB-X6/S6 only)
f
Check
Are images from a port other than the Computer Input port
being projected?
Change the following settings according to the signal for the connected equipment.
When projecting images from equipment connected to Computer Input port, see s "Signal" - "Input
Signal" p.41
When projecting images from equipment connected to Video or S-Video, see s"Signal" - "Video Signal"
p.41
Adjust the "Brightness" setting in the configuration menu. s"Image" - "Brightness"
Check that all the cables required for projection are securely connected.
Adjust the "Contrast" setting in the configuration menu. s"Image" - "Contrast"
Adjust the "Color Adjustment" setting in the configuration menu. s"Image" - "Color Adjustment"
Adjust the "Color Saturation" and "Tint" settings in the configuration menu. s"Image" - "Color
Saturation", "Tint" p.40
Adjust the "Brightness" and "Brightness Control" settings in the configuration menu.
s"Image" - "Brightness" p.40 s"Settings" - "Brightness Control"
Adjust the "Contrast" setting in the configuration menu.
s"Image" - "Contrast" p.40
When the lamp is nearly ready for replacement, the images become darker and the color quality becomes
poorer. When this happens, replace the lamp with a new lamp. s
The only images that can be displayed on an external monitor are computer images from the Computer Input
port. s p.78
Remedy
p.40
Remedy
p.43
p.67
Remedy
59
p.40
p.40