Asus P8H67-V R3 User Manual page 24

7. Intel H67 Serial ATA 3.0Gb/s connectors (7-pin SATA1~4 [blue])
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
P8H67-M2/TPM/SI
P8H67-M2/TPM/SI Intel
• These connectors are set to [IDE Mode] by default. In IDE mode, you can connect Serial
• Before creating a RAID set, refer to the RAID Supplementary Guide included in the
• You must install Windows
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
8. Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
P8H67-M2/TPM/SI
P8H67-M2/TPM/SI Speaker connector
1-14
SATA 3.0Gb/s connectors
®
ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
See section 2.5.4 SATA Configuration for details.
folder named Manual in the support DVD.
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows
See section 2.5.4 SATA Configuration for details.
SATA3G_3 SATA3G_1
SATA3G_4 SATA3G_2
XP Service Pack 3 or later version before using Serial ATA
®
XP SP3 or later version.
®
SPEAKER
PIN 1
ASUS P8H67-M2 Series