Usb 2.0 Connectors - Asus P8H67 User Manual

8. USB connectors (10-1 pin USB78, USB910, USB1112 )
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with the USB 2.0 specification that supports up
to 480Mbps connection speed.
P8H67 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
9. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Definition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
P8H67 Front panel audio connector
If you want to connect a high-definition front panel audio module to this connector, ensure
that the Front Panel Type item in the BIOS is set to [HD Audio]. If you want to connect an
AC97 front panel audio module to this connector, set the item to [AC97]. See section 2.5.6
Onboard Devices Configuration for details.
1-30
P8H67
P8H67
USB78 USB910 USB1112
PIN 1 PIN 1 PIN 1
PORT2 L
SENSE2_RETUR
SENSE_SEND
PORT2 R
SENSE1_RETUR
PORT1 R
PRESENCE#
PORT1 L
GND
PIN 1
HD-audio-compliant
pin definition
AAFP
NC Line out_L
NC
NC Line out_R
NC MICPWR
AGND MIC2
PIN 1
Legacy AC'97
compliant definition
Chapter 1: Product introduction