Storage Configuration - ASROCK Z77 WS User Manual

3.4.4 Storage Configuration

SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
This item is for SATA3_0, SATA3_1 and SATA2_2 to SATA2_5 ports. Use
this to select SATA mode. Configuration options: [IDE Mode], [AHCI Mode]
and [RAID Mode]. The default value is [AHCI Mode].
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE mode
does not have these advantages.
SATA Aggressive Link Power Management
Use this item to configure SATA Aggressive Link Power Management.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analy-
sis, and Reporting Technology) feature. Configuration options: [Disabled]
and [Enabled].
ASMedia SATA3 Mode
This item is for SATA3_A1 to SATA3_A4 ports. Use this to select ASMedia
SATA3 mode. Configuration options: [IDE Mode], [AHCI Mode] and [Dis-
abled]. The default value is [AHCI Mode].
SATA Boot ROM
Use this to enable or disable ASMedia SATA Boot ROM. The default value
is [Disabled].
77