ASROCK Z77 WS User Manual page 25

User manual

Hide thumbs Also See for Z77 WS:

Table of Contents

Step2.

If required, connect the auxiliary power source to the PCI Express graph-

ics cards.

Step3.

Align and insert the ASRock SLI_Bridge_3S Card to the goldfingers on

each graphics card. Make sure the ASRock SLI_Bridge_3S Card is firmly

in place.

ASRock SLI_Bridge_3S Card

Step4.

Connect a VGA cable or a DVI cable to the monitor connector or the DVI

connector of the graphics card that is inserted to PCIE1 slot.

2.7.1.2 Installing Three SLI

Step 1.

Install identical 3-Way SLI

fied because different types of graphics cards will not work together prop-

erly. (Even the GPU chips version shall be the same.) Each graphics card

should have two goldfingers for the 3-Way SLI Bridge connector. Insert

one graphics card into PCIE1 slot, another graphics card to PCIE3 slot,

and the other graphics card to PCIE5 slot. Make sure that the cards are

properly seated on the slots.

Two Goldfingers

-Ready Graphics Cards

-ready graphics cards that are NVIDIA

certi-

Table of Contents