Download Print this page

Encore ENL832-TX-RE User Manual

10/100mbps fast ethernet lan card
Hide thumbs Also See for ENL832-TX-RE:

Advertisement

Quick Links

ENL832-TX-RE
ENL832-TX-RENT
&
ENL832-TX-EN
ENL832-TX-ICNT
&
10/100Mbps Fast Ethernet LAN Card
User's Guide
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits of a Class B
computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
If you suspect this product is causing interference, turn your computer on and off while
your radio or TV is showing interference. If the interference disappears then when you
turn the computer off and reappears then you turn the computer on, something in the
computer is causing interference.
Features & Specifications
Features & Benefits:
* Supports 32-bit PCI Bus Master for high performance and low processor utilization.
* Complies to PCI 2.1 and PCI 2.2 specification
* Complies with the IEEE 802.3 CSMA/CD, 10/100Base-TX standard.
* Full duplex design to double the performance to 20Mbps/200Mbps.
* One STP connector for 100Mbps or 10Mbps network speed.
* Support Auto-negotiation function.
* Built-in FIFO buffers to eliminate external memory.
* Auto-setups IRQ and I/O address.
* Supports early interrupt on transmit to increase performance.
* Supports Novell NetWare, Windows NT/98/ME/2000/XP and other popular
operating systems
* Provides diagnostic software
* Wake on LAN (If adapter supports WOL function).
* Topology : Star
* Connect to : RJ-45
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENL832-TX-RE and is the answer not in the manual?

Questions and answers

Summary of Contents for Encore ENL832-TX-RE

  • Page 1 ENL832-TX-RE ENL832-TX-RENT & ENL832-TX-EN ENL832-TX-ICNT & 10/100Mbps Fast Ethernet LAN Card User's Guide FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits of a Class B computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Hardware Installation

    Standard & Specification: * Standard: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX * Transmission Rate: 10Mbps or 100Mbps * Hardware Required: IBM compatible PC with available PCI slot ( PCI 2.1 or PCI 2.2 ) * IRQ Line: Assigned by system * I/O Address : Assigned by system * Drivers: Novell NetWare, Windows NT/98/ME/2000/XP and other popular operating systems...
  • Page 3: Driver Installation

    Driver Installation: [For ENL832-TX-RE & ENL832_TX_RENT] Windows Windows 2000 Windows a) When Windows boots up, operating system will detect the LAN card and Found New Hardware Wizard windows will appear. Click Cancel b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver: c) When OS finishes loading device driver, window below will appear.
  • Page 4 Windows 98SE: a) When system boots up, operating system will automatically detect the LAN card and Add New Hardware Wizard window will appear, and then click Cancel: b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver to install device driver.
  • Page 5 c) When window below appears, click OK to restart the Windows. d) When Windows boots up again, Add New Hardware Wizard window will appear, then click Next to continue the LAN card installation.
  • Page 6 e) Select Search for the best driver for your device, then click Next to continue the installation. f) Select Specify a location then click Next to continue:...
  • Page 7 g) Click Next to continue the installation: h) Click Next to load LAN card device driver:...
  • Page 8 i) Insert the Windows 98/98se CD-ROM in the CD-ROM drive then enter the CD location and click OK to load file: j) Click Finish to complete file loading: k) Click Yes to restart the system, when system boots up again, you are ready to use the LAN card.
  • Page 9 [For ENL832-TX-EN & ENL832_TX_ICNT] Windows XP, Windows 2000, Windows a) When Windows boots up, operating system will detect the LAN card and Found New Hardware Wizard windows will appear. Click Cancel: b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver:...
  • Page 10 c) When OS finishes loading device driver, window below will appear. Click Ok to complete the installation: Windows 98SE a) When Windows boots up, operating system will detect LAN card and Add New Hardware Wizard window will appear. Click Cancel:...
  • Page 11 b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver: c) After OS finishes loading device driver, window below will appear then click OK to restart the system. d) After the system boots up, Please wait for a while to finish setting up the device.

This manual is also suitable for:

Enl832-tx-rentEnl832-tx-enEnl832-tx-icnt