Recording Features; Hint For Timer Recording; Copying A Video Tape - Emerson EWV403 Owner's Manual

9. Recording Features

Timer Recording
•Insert a tape with its record tab into the VCR.
1 1
-MENU-
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
MENU
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
2
PROGRAM NUMBER 4
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
or
REC SPEED – –
Select an empty program
number
3 3
PROGRAM NUMBER 4
B ONCE
DAILY
WEEKLY
or
Select "ONCE", "DAILY"
(Mon-Fri), or "WEEKLY"
4 4
Select the desired month
ONE TIME PROGRAM
PROGRAM NUMBER 4
or
DATE 0 5 / 0 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Select the desired day
or
• You can program one
year in advance.
5 5
Select the desired start
time (hour)
ONE TIME PROGRAM
PROGRAM NUMBER 4
or
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Select the
minute
or
6
6
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
or
CHANNEL – –
REC SPEED – –
AM
B PM
Select "AM" or "PM"
7
7
Repeat the procedure in steps
5 and 6 to set the end time.
8
8
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
or
CHANNEL 1 6
REC SPEED – –
Select the desired channel
• If you have connected the VCR to a cable
box or satellite box as the Connection A
on page 1, select the VCR to channel 3 or
4 (the RF output channel of the VCR).
Then, select the desired channel at the
cable box or satellite box. Leave the cable
box or satellite box on for timer recording.
9 9
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
or
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED SP B SP
SLP
Select the desired recording speed
C.RESET
EXIT
10 10
Turn off the VCR
POWER
for recording
• TIMER indicator on the VCR lights up.
Hint Hint
• To go back one step, press the REW button
(during the steps [3] to [9].)
To Check, Correct, or Cancel a
Timer Program
1) Turn the power on by pressing
the POWER button.
2) Select main menu by pressing
the MENU button.
3) Select "TIMER PROGRAM-
MING" by pressing the PLAY or
STOP button. Then, press the
F.FWD button.
4) Select the program number
which you want to check by
pressing the PLAY or STOP but-
ton. The details of the program
you selected will appear on the
TV screen.
• Go to the digit you want to
change by pressing the F.FWD
or REW button. Then, enter cor-
rect numbers by pressing the
PLAY or STOP button.
• You may cancel the entire pro-
gram by pressing the REW but-
ton while the program number
flashes.
5) Press the C.RESET/EXIT button
to exit.
6) Press the POWER button to
return to timer stand-by mode.
- 6 -

Hint for Timer Recording

• If there is a power failure or the VCR has been unplugged for more than 30 sec-
onds, the clock setting and all timer settings will be lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode
immediately, eject the tape and the VCR power will be turned off. The TIMER
indicator will flash.
• If a tape is not in the VCR or does not have the record tab, the TIMER indicator
flashes and timer recording cannot be performed. Please insert a recordable tape.
• When all the Timer Recording are completed, the TIMER indicator flashes.
To play or eject the recorded tape, press the POWER button first, and then
press the PLAY or EJECT button.
To cancel a Timer Recording that is in progress
Press the STOP/EJECT button on the VCR.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes
may be an infringement of copyright laws.
(Back of Recording VCR*)
(Back of Playing VCR)
1
AUDIO
OUT OUT
OUT
Connect
IN
IN
VIDEO
VIDEO
AUDIO
Audio/Video Cables
(not supplied)
1) Insert a pre-recorded tape into the playing VCR.
2) Insert a tape with its record tab into the recording VCR.
3) Press the SPEED button on the remote control of the recording VCR
to select the desired recording speed (SP/SLP).
4) Select the "L1" or "L2"position on the recording VCR.
• To use the input jacks on the back of the VCR, select "L1" position by
pressing [0], [0], [1] on the remote control or the CHANNEL buttons.
• To use the input jacks on the front of the VCR, select "L2" position by
pressing [0], [0], [2] on the remote control or the CHANNEL buttons.
5) Press the REC/OTR button on the recording VCR.
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press the STOP/EJECT button on the recording
VCR, then stop playback of the tape in the playing VCR.
Hint
Hint
• For best results during dubbing, use the VCR's front panel controls whenever possible. The
remote control might affect the playing VCR's operation.
• Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are
not recommended.
• You can use a video disc player, satellite receiver, or other audio/video component with A/V out-
puts in place of the playing VCR.
• "L1" or "L2" is found before the lowest memorized channel. (Example: CH02)
(Back of TV)
2
ANT
IN
Connect
IN
OUT
RF Cable
(supplied)
*Front input jacks are also available
EN