Emerson EV477 Owner's Manual page 28

RECORDING TV PROGRAMS (CONTINUED)
TO WATCH ONE CHANNEL AND RECORD ANOTHER
Follow the procedure all the way through the
1
recording TV programs.
Make sure you have the VCR connected properly
as shown on pages 10 to 15.
Set VCR to the TV mode by pressing the TV/VCR
key so that VCR indicator disappears.
Then select the TV channel you want to watch by
2
using TV channel selector on the TV receiver.
Press the STOP key to STOP the recording.
NOTE:
Since the VCR has its own TV tuner, it is not necessary to turn on the TV in order to make a recording.
Turning on the TV merely allows confirmation of proper channel settings on your VCR.
PREPARATION
First, turn on the TV and set it to your VCR channel.
Load a cassette into VCR, making sure that the safety tab is intact.
1
The power will turn on automatically.
Select the CHANNEL SET mode from the MENU screen and select the CABLE mode by pressing the
2
number key 3.
3
Press the number keys or the CH/TRK
record.
Also select the speed at which you want to record – SP or EP – by using the Speed key.
4
Press the REC/OTR key and the recording will start.
5
The REC indicator appears on the Display Panel.
TO STOP RECORDING
TO RECORD A CABLE PROGRAM
or key to select the channel you want to watch and
27