Intel D845EPI Product Manual page 58

Intel Desktop Board D845EPI Product Guide
Table 17. Peripheral Configuration Submenu (continued)
Feature
Mode
Base I/O Address
(This feature is present
only when Parallel Port
is set to Enabled)
Interrupt
(This feature is present
only when Parallel Port
is set to Enabled)
Audio
LAN Device
(This feature is present
only when there is
onboard LAN)
58
Options Description
• Output only
Selects the mode for the parallel port. Not available if the
• Bi-directional
parallel port is disabled.
(default) Output Only operates in AT*-compatible mode.
• EPP
Bi-directional operates in PS/2-compatible mode.
• ECP
EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed
bi-directional mode.
• 378 (default)
Specifies the base I/O address for the parallel port, if
• 278 Parallel Port is Enabled.
• IRQ 5
Specifies the interrupt for the parallel port, if Parallel Port is
• IRQ 7 (default) Enabled.
• Disabled
Enables or disables the onboard audio subsystem.
• Enabled (default)
• Disabled
Enables or disables the LAN device.
• Enabled (default)