Channel Set Up Again; Selecting The Language - Emerson EWC20D3 Owner's Manual

CHANNEL SET UP AGAIN

1
Select "CHANNEL SET UP"
Press SETUP on the remote control.
Press K or L to point to "CHAN-
NEL SET UP".
Then, press ENTER.
2
Begin auto preset
Press K or L to point to "AUTO
PRESET". Then, press ENTER.
The tuner scans and memorizes all
the active channels in your area.
NOTES:
•
The TV/DVD distinguishes between standard TV
channels and cable(CATV) channels.
•
The TV/DVD may memorize TV channels as
CATV channels if reception conditions is poor. If
this happens, try AUTO PRESET action again
when reception conditions are better.
3
After scanning
The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE

NOTE: This function effects only the language on
the screen menu and not the audio source.
1
Select "LANGUAGE"
Press SETUP on the remote control.
Press K or L to point to "LAN-
GUAGE".
Then, press ENTER to select
"ENGLISH" or "ESPAÑOL"=
Spanish or "FRANÇAIS"= French.
2
Exit the Language mode
Press SETUP on the remote control to return to TV
mode.
NOTE: If Spanish or French is selected accidentally,
1) Press SETUP on the remote control.
2) Press K or L to point to "IDIOMA [ESPAÑOL]"
or "LANGAGE" [FRANÇAIS].
3) Press ENTER to select your desired language.
4) Press SETUP to exit.
TV
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (TV)
B AUTO PRESET
TV
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
– 14 – – 14 – – 14 –
EN
0C28