ASROCK 939S56-M Manual page 2

2. The SiS RAID Utility window opens as below. The main interface has two
tabs: View and Configuration. You can switch to different tabs by
clicking on it. On "View" tab, we can see some device information on
different controllers. You can click the drop-down box "Adapter" to se-
lect the controller you want to use. The default value is the information of
the first device on "SiS RAID controller 1".
3. Click the tab Configuration, you can find three tabs: Create Raid,
Delete Raid, and Raid Recovery. In the same way, you can switch to
different tabs by clicking on it.