Emerson OxyBalance Instruction Manual page 27

Instruction Manual
IM-106-4050 Original Issue
March 2006
Figure 3-10. Alarm History
On the Alarm History page, shown in Figure 3-10, there are three sets of
arrows used for selecting the alarms. These are located in the bottom center
portion of the screen. To scroll between individual alarms use the set of
arrows on the right. To jump to the next or previous page of alarms use the
middle set of arrows. To jump to the top or bottom of the list, use the set of
arrows on the left side. These are also shown on the Active Alarms page.
The Ack Alm and Ack All buttons are used to acknowledge the alarms.
Acknowledging alarms has no effect on the operation of the system. It is an
aide for determining which alarms have and have not been seen. Once an
alarm has been acknowledged, by using either the Ack Alarm or Ack All
button, an asterisk appears next to the date and time of the alarm.
OxyBalance Oxygen Display
and Averaging System
3-11