Prior To The First Use; Daytime Setting; First Cleaning; First Heating-Up - Electrolux EOB 854 Instruction And Installation Manual

Prior to the first use

Daytime setting

When the oven has been connected to the mains and
after failure of electricity, the time display of the electro-
nic autotimer flashes 0.00 and AUTO. The present
daytime has to be set. Without this, the oven cannot be
used. The time display covers the range from 0.01 to
24.00 hours.
.
Push buttons
hold it.
.
At a time set the present daytime by pushing
button forwards or button
To make corrections of time (summer--/winter--time,
etc.) simultaneously press the two adjusting buttons
and adjust the actual time with

First cleaning

In order to remove possible production remnants,
clean the appliance once prior to first use.
Remove any possibly existing labels and protective
foils from the front of the appliance.
Clean control panel and oven door with hot water and
a washing-up liquid and dry.
Remove the accessories from the oven and wash
them.
The clean-enammelled cavity has to be washedo with
warm water and a washing-up liquid. Then dry it.
The oven lighting may be switched on for this purpose
by setting the function switch to position .
First heating up
Prior to first use the oven must be heated up
once. Take care for a sufficient space ventilation.
Set function switch to top / bottom heat and temperatu-
re selector knob to 250
Holding this setting, operate the empty and closed
oven for 60 minutes.
and simultaneously and
backwards.
or .
o
C.
7
STOP
STOP
D
250