Electrolux ESF 66814 User Manual page 16

16 electrolux
Problem
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and dull.
ACTIVATING THE RINSE AID
DISPENSER
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold buttons (4) and (5) at the
same time until the indicators of buttons
(3), (4) and (5) flash.
3. Release button (4) and button (5).
4. Press button (4).
• The indicators of buttons (3) and (5)
go off.
• The indicator of button (4) continues
to flash.
Possible cause
The salt container cap is not
closed correctly.
Rinse aid dosage is too high.
Rinse aid dosage is too low.
The detergent can be the
cause.
You have set a washing pro-
gram without drying phase or
with a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is activa-
ted (this function automatically
deactivates the rinse aid dis-
penser).
5. Press button (4) to change the setting.
6. Switch off the appliance to confirm.
Possible solution
Ensure that the salt container
cap is correctly closed.
Decrease the rinse aid dosage.
Increase the rinse aid dosage.
Use a different brand of deter-
gent.
Let the door stay ajar for some
minutes before you remove the
dishes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
• The display shows the setting of the
rinse aid dispenser.
The display shows the new adjustment.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated