Turning On/Off The Power; Initial Installation - Sharp Aquos LC-60LE550U Operation Manual

Watching TV

Turning On/Off the Power

POWER
POWER
(On/Standby)

Initial Installation

When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels available
in the region where you live. Perform the following steps
before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page
10.)
2. Connect the antenna cable to the TV. (See page 10.)
3. Plug in the AC cord to the AC outlet. (See page 9.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1 Press c / d to select the desired language listed on
the screen, and then press ENTER.
Language
TV Location
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifi es for ENERGY STAR in
Home mode default setting.
2 Press c / d to select "Home" or "Store", and then
press ENTER.
TV Location
Air/Cable
Home: AV Mode is set to "STANDARD (ENERGY STAR)".
Store: AV Mode is set to "DYNAMIC (Fixed)".
• ENERGY STAR qualifi cation is based on AV Mode
"STANDARD (ENERGY STAR)".
Press POWER on the TV or on the remote control unit to turn the
power on.
• The Initial Installation starts when the TV powers on for the fi rst time. If the
TV has been turned on before, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, perform "EZ setup" on the Setup
menu on page 21.
Press POWER on the TV or on the remote control unit again to turn the
power off.
• The TV enters standby and the image on the screen disappears.
• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
Press c / d to select "Air" or "Cable", and then
3
press ENTER.
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
4
After "Air/Cable" has beet set,
"CH Search".
Press d or ENTER to start channel search.
English
• If no channel is found, confi rm the type of connection made
with your TV and try "EZ Setup" again. (See page 21.)
• For changing the settings of the Initial Installation, perform
"EZ setup" on the Setup menu on page 21.
Home
13
Air/Cable Cable
CH Search
the cursor moves to
Air/Cable Cable
CH Search