Listening To The Radio - Emerson Research iTone iR30 Owner's Manual

O P E R AT I N G I N S T R U C T I O N S

Listening To The Radio

1.) Turn the ON/OFF-VOLUME control clockwise to turn the unit ' On' . The POWER
' On' LED indicator will light.
2.) Set the Band/Function selector to the desired band, AM or FM.
3.) Rotate the TUNING control to tune to the desired station.
4.) Adjust the ON/OFF-VOLUME control to the desired volume level.
5.) When you are finished listening turn the ON/OFF-VOLUME control fully
counter-clockwise to turn the unit ' Off' . The POWER ' On' LED indicator
goes ' Off' .
Antenna Information
FM: The FM wire antenna is attached on the back cabinet. It may be necessary to
adjust the position of the FM wire antenna to find the position that provides
the best FM reception.
AM:
The AM bar antenna is inside the cabinet of the main unit. You may need to
change the position of the main unit until you find the position that provides
the best reception for your favorite AM stations.
iR30_5_101206.p65
8
8 13/10/2006, 13:44