Emerson Research iTone iR30 Owner's Manual page 12

4.) Set the HOLD switch on your iPod
click-wheel controls.
5.) Place your iPod
the iPod ® connector is fully inserted into the socket on the bottom of the
®
iPod .
®
If the iPod is not fully connected the sound may be intermittent or you may
hear no sound at all.
6.) Turn the ON/OFF-VOLUME control clockwise to turn the unit ' On' . The
POWER ' On' LED indicator comes on.
7.) Set the Band/Function selector to the AUX/iPod position. Your iPod
turn ' On' . It may begin playing immediately or it may show the Main Menu
display.
8.) Use the click-wheel navigation controls on your iPod to select the desired
music and then press the iPod
necessary.
9.) Adjust the ON/OFF-VOLUME control on the front panel of the radio to the
desired level. The click-wheel volume control on the iPod
®
the iPod is in the docking station.
10.) When you are finished listening, turn the ON/OFF-VOLUME control fully
counter-clockwise to turn the unit ' Off' . The iPod
the ' Charging' mode.
iR30_5_101206.p65
® to the ' Off' position to unlock the iPod
®
into the adapter in the docking station and make sure that
® Play/Pause button to begin playback if
11
11
®
® is disabled while
® will stop playback and enter
13/10/2006, 13:44
®
should