Laundry Is Not Spun Enough - Electrolux EW 1077 F Instruction Booklet

Problem
• Spinning starts late or the

laundry is not spun enough:

Water is
not visible in the machine. The
machine, which is the result of modern
technology, runs in a very economical way with
low water consumption. Performance is
nevertheless excellent.
P1035UK
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Possible cause
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 6 minutes, the
laundry is still not evenly distributed in the drum,
the machine will spin at a lower speed. If at the end
of the programme the laundry is not spun enough,
redistribute the load manually and select the spin
programme.
The machine makes an unusual noise.
The machine is fitted with a commutator motor
which improves machine
performance.
P1034UK
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
25