Installation Using Disk Manager - Seagate ST33221A - Medalist 3.2 GB Hard Drive Installation Manual

Medalist 8641, 6531, 4321 and 3221, Rev. B

Installation using Disk Manager

1. Boot your computer from your DiscWizard diskette. Booting
from a diskette ensures that the Disk Manager installation
does not conflict with other software. The Disk Manager soft-
ware is stored on this diskette and automatically starts.
Or at the A: prompt, type DM and press
2. Follow the onscreen instructions until you see the Select an
Installation Option menu.
3. Select either (E)asy Disk Installation or (A)dvanced Disk
Installation.
Disk Manager lists all the hard drives that it detects. You
should see your new Seagate drive and your existing hard
drive, if any.
If any hard drive is not recognized, exit Disk Manager and
turn off your computer. Check all cables, jumpers and BIOS
settings. Then start at step 1 to run Disk Manager again.
4. If Disk Manager recognizes all your drives, select the drive
you want to install and press
and formats the drive.
Important. Carefully read the information provided by Disk Man-
ager during installation. Important instructions
regarding booting from your A: drive will be provided
if Disk Manager determines that your BIOS needs
support for drive capacities greater than 8.4 Gbytes.
.
ENTER
. Disk Manager partitions
ENTER
15