Controlling The External Device Via The Projector (Using The Network Bridge Function); Connecting Devices - Dukane 8111H User Manual

Network guide

Table of Contents

3.8 Controlling the external device via the projector

(using the NETWORK BRIDGE function)

This projector is equipped with the NETWORK BRIDGE function to perform

mutual conversion of a network protocol and a serial interface.

Using the NETWORK BRIDGE function, a computer that is connected with

this projector by Ethernet communication can control an external device that is

connected with this projector by RS-232C communication as a network terminal.

Computer

1) Connect the projector's LAN port and the computer's LAN port with a LAN

cable, for Ethernet communication.

2) Connect the projector's CONTROL port and the device's RS-232C port with

an RS-232C cable, for RS-232C communication.

NOTE

• Before connecting the devices, read the manuals for the devices to

ensure the connection.

For RS-232C connection, check the specifications of each port and use

the suitable cable. ("Connection to the ports" in the User's Manual -

Operating Guide (Technical))

Protocol change

TCP/IP data

Ethernet

LAN cable

LAN port

3. Network Functions

Serial data

RS-232C

RS-232C cable

CONTROL port

External device

Table of Contents