Automatic Rinse/Self-Cleaning Cycle - Saeco HD8750/47 User Manual

2 Press the " " button to start the cycle. The machine starts the au-
tomatic priming of the circuit by dispensing some water through the
Pannarello.
3 When the process is completed, the "
machine is in warm-up mode.

Automatic rinse/self-cleaning cycle

When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
4 Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
5 The " " and " " buttons fl ash during the whole process. Wait for the
cycle to fi nish automatically.
6
Wait for the cycle to fi nish automatically.
Note:
You can stop dispensing as well, by pressing either the "
ton.
7 When the above steps are complete, check that the buttons "
" " " " fl ash steadily.
ENGLISH
"and " " buttons fl ash. The
" or " " but-
","
11
",