Program Shift - Panasonic DMCFZ100 - DIGITAL STILL CAMERA Operating Instructions Manual

In Program AE Mode, you can change the preset aperture
value and shutter speed without changing the exposure.
This is called program shift.
You can make the background more blurred by decreasing
the aperture value or record a moving subject more
dynamically by slowing the shutter speed when taking a
picture in Program AE Mode.
•
Press the shutter button halfway and then use the rear dial to
activate program shift while the aperture value and the shutter speed are displayed on the
screen (about 10 seconds).
•
The program shift indication
•
Program shift is canceled if the camera is turned off or the rear dial is rotated until the program
shift indication disappears.
∫ Example of program shift
(A): Aperture value
(B): Shutter speed
1 Program shift amount
2 Program shift line chart
3 Program shift limit
Note
•
If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turns red.
•
Program shift is canceled and the camera returns to normal Program AE Mode if more than
10 seconds pass after program shift is activated. However, the program shift setting is
memorized.
•
Depending on the brightness of the subject, program shift may not be activated.
Basic

Program shift

A
appears on the screen when program shift is activated.
- 56 -
1 2 3 4 5 6
2
2.8
4
(A)
5.6
8
11
1 1 / 2 1 / 4 1 / 8 1 / 15 1 / 30 1 / 60 1 / 125 1 / 250 1 / 500 1 / 1000 1 / 2000
(B)
7 8 9 10 11 12 13 14