Panasonic WJ-ND400/1000 Quick Reference Manual page 2

ND400_A3_E.fm 2 ページ ２００８年４月８日 火曜日 午後２時５９分
Control Items
(2) (3) (4) (5)
(1)
(9)
(8)
Basic Setup
Set up the minimum settings necessary to use the recorder.
(Ι) Set the current date
Click the [Setup] button, and then click This will display the "Quick" menu.
[Quick].
Set up the current time and date.
Under "Time & date", click the [Set]
button
(ΙΙ) Register the cameras
Select the network port for detecting Select camera port or client PC port.
cameras.
Use the camera auto-registration item Select [Register the IP address
to specify whether a detected camera automatically given by this unit to a
should be assigned an IP address. detected camera] or [Register the IP
address set with a detected camera].
Click the [Registration] [OK] buttons. A "Camera registration result" window
will appear after registration is
complete.
Check the results of the recording and Up to 64 cameras can be registered.
click [OK]. • If a camera you want to register is not
detected or if you want to change the
settings of a camera, do it in "NW
camera" set up.
(ΙΙΙ) Programming
When cameras have been registered,
the live video and manual recording
rate settings of the "Program1" page
are set to 1ips.
Click the [Display] button to check
programming details.
(1) [Control] button
Search for and play back recorded images, as well as
switch camera channels.
(2) [Cam. Select] button
Switch camera channels for the image displayed.
(6)
(3) [Setup] button
Set up the recorder.
(4) Status display area
Display the recording and playback status of recorded
images.
(5) Current time display area
Displays the current time.
(7)
(6) Image display
Display live and recorded images.
(7) Playback point operations area
Specify the current position in an image being played
back, and play back the most recent image.
(8) [HDD] tab
Control playback of recorded images.
(9) [CAM] tab
Control zoom, focus, and automatic functions of the camera.
(1)
(2)
(3)
Monitor Live Images
Display live images on a 1-screen or on a 4-screen (multiscreen).
Click the [Cam. select] button. The camera list is displayed in the
[Camera select] box.
Click [WJ-ND400] and select in order The live image from the selected
the camera group title and camera title. camera channel is displayed on a 1-
screen.
Click the [Multiscreen] button. The camera image is displayed on 4
separate screens.
• Each clicking the [Multiscreen] button
switches the 4-screen displays.
Display live images in the sequential display.
Click the [Cam. select] button and then Live images are displayed in the
click the [Sequence] button. sequential display.
• The [Sequence] button indicator
lights green and [SEQ] is displayed
on the Status display area.
Click the [Sequence] button again. The [Sequence] button indicator goes
off and the sequence operation is
stopped.
Control the Camera
You can control cameras that can pan and tilt from the [CAM] tab.
(1) [Zoom] : Zoom in/out the image from the camera.
(2) [Focus] : Adjust the focus point of the image.
(3) [Auto mode] : Select the camera's automatic mode
function.
(4) [Control buttons] : Adjust the direction of the camera.
[Control pad] : The pan/tilt movement increases as you
move from the center of the pad to the
edges.
(5) [Brightness] : Adjust the lens iris. (brightness)
(6) [Preset] : Registers the preset positions of camera
and moves the camera to the registered
preset positions.
Manual recording
You can record manually.
Click the [ ] button in the [REC] box Click the [ ] button until the
on the [HDD] tab. [Recording] and [Recording stop]
button are displayed.
Click the [Recording] button. In the status display "
red, and recording starts.
Click the [Recording stop] button. In the status display "
off, and recording stops.
[CAM] Tab
(1) (3) (4) (5)
(2) (6)
[REC]" lights
[REC]" turns
(1)
(2)
(3)