Nikon D5200 Reference Manual page 32

4
Insert a memory card (available separately).
Check to be sure the card is in the correct orientation and then slide the card
until it clicks into place.
5
Attach a lens.
Be careful to prevent dust from entering the camera when the lens or body cap
is removed.
Mounting mark (lens)
Autofocus is available with AF-S lenses. When using
autofocus with a lens equipped with an A-M mode switch,
slide the switch to A (if the lens has an M/A-M switch, select
M/A for autofocus with manual override). For information
on other lenses that can be used with the D5200, see page 199.
If the lens has a vibration reduction (VR) switch, select ON
to reduce the effects of vibration (0 238).
15
Mounting mark
(camera)
Keeping marks (white dots) aligned, position lens on
camera, then rotate until lens clicks into place.
Mounting mark (lens;
indicated by white dot)