If You Have Powered Speakers Without An Adapter - Lenovo C100 - IdeaCentre - Desktop PC User Manual

a. Connect the cable that runs between the speakers if necessary. On some
speakers, this cable is permanently attached.
b. Connect the adapter cable to the speaker if necessary. On some speakers, this
cable is permanently attached.
c. Connect the speakers to the Headphone port on the computer.
d. Connect the adapter to the power source.
1.4.6 If you have powered speakers without an adapter：
(This picture is only a sketch print, it does not show the actual figure of the speaker)
a. Connect the cable that runs between the speakers if necessary. On some
speakers, this cable is permanently attached.
b. Connect the cable to the speaker if necessary. On some speakers, this cable is
permanently attached.
c. Connect the speakers to the Headphone port on the computer.
d. Connect the plug to the power source.
Note: Some models are not equipped with external speakers.
1.4.7 Connect any additional devices that you have. Your
computer might not have all connectors shown.
1

User Guide
31039393_3000 C100_UG_EN_V2.0.in6 6
2 3 4
 
2009.8.21 2:13:20 PM