Advertisement
Step 4. Slide the Hard Drive Door away
from the unit, and lift to remove.
Step 7. Insert the enclosed screwdriver
in the notch exposing the ODD Bracket
(metal). Push to remove the ODD.
Step
10.
Remove
brackets.
P/N 989201343
Rev. B
VPCS1 Series Optical Disk Drive
Step 5. Locate the Optical Disk Drive
(ODD) Bay.
Step 8. Carefully remove the ODD from
the unit.
the
screws
&
Step 11.
screws as shown above, and then set
the old ODD aside.
Replacement Instructions
R
B
Arrange the brackets &
2/4
Step 6. Using the enclosed magnetic
screwdriver, remove the (2) screws
securing the ODD Bay.
Put aside the ODD Bay screws for
later in the procedure.
ODD Disassembly
(Steps 9-11)
Step 9. Identify the (4) side screws
that secure the ODD brackets to the
ODD.
ODD Assembly
(Steps 12-15)
Step 12. Take the new ODD and
bezel provided in the CRU kit and
prepare for assembly.
Advertisement
