Picture Pc - Samsung SMT-4022 User Manual

Settings

Picture PC

1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is
selected, the set value of the selected function is displayed in the slide. When selected, each
function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen,
the default value is displayed. Changing a value in this screen will automatically change the mode
to "CUSTOM."
1) Picture PC
- Available only for PC, BNC, DVI.
2) Contrast
- Adjusts Contrast of the selected monitor .
3) Brightness
- Adjusts Brightness for the selected monitor .
4) Red
- Adjusts red Color of the selected monitor .
- Available only for NT.
5) Green
- Adjusts green Color of the selected monitor.
- Available only for NT.
6) Blue
- Adjusts blue Color of the selected monitor .
- Available only for NT.
7) Color Tone
- Adjusts the Color Tone for the selected monitor .
8) Color Temp
- Adjusts the Color Temp for the selected monitor .
9) Brightness Sensor
- Adjusts the Brightness Sensor for the selected monitor .
10) Dynamic Contrast
- Adjusts the D y namic Contrast for the selected monitor .
The Input source of MagicInfo works only on MagicInfo model.
The Input source of TV works only on TV model.
Color Temp is only enabled if the Color Tone is set to Off.
This feature is available only for the monitors whose p
is made, the
factory default is displayed.
ower status is ON and if no selection
50