Attaching The Brackets To The Switch - Cisco WS-C2950-12 Hardware Installation Manual

Desktop switch
Hide thumbs Also See for WS-C2950-12:
Table of Contents

Advertisement

Installing the Switch in a Rack
Note

Attaching the Brackets to the Switch

Catalyst 2950 Desktop Switch Hardware Installation Guide
2-10
To install the switch in a 19-, 23-, or 24-inch rack, follow these steps:
Attaching the Brackets to the Switch, page 2-10
Mounting the Switch in a Rack, page 2-19
Attaching the Optional Cable Guide, page 2-19
Installing the Catalyst 2950G-48-EI switch in a 23-inch or 24-inch rack requires
an optional bracket kit not included with the switch. You can order a kit
containing the 23-inch or 24-inch rack-mounting brackets and hardware from
Cisco (part number RCKMNT-1RU=).
The bracket orientation and the screws that you use depend on whether you are
attaching the brackets to a 19-, 23-, or 24-inch rack. Follow these guidelines:
When mounting a switch other than a Catalyst 2950G-48-EI switch in a
19-inch rack, use two Phillips flat-head screws to attach the long side of the
19- or 24-inch bracket to the switch. See
Figure
2-3.
When mounting a Catalyst 2950G-48-EI switch in a 19-inch rack, use three
Phillips flat-head screws to attach the long side of the 19- or 24-inch bracket
to the switch. See
When mounting a Catalyst 2950G-24-EI-DC switch in a 23-inch rack, use
two Phillips truss-head screws to attach the 23-inch bracket to the switch. See
Figure
2-7,
Figure
When mounting a switch other than a Catalyst 2950G-48-EI switch in a
24-inch rack, use two Phillips truss-head screws to attach the 19- or 24-inch
bracket to the switch. See
When mounting a Catalyst 2950G-48-EI switch in a 24-inch rack, use three
Phillips flat-head screws to attach the 24-inch bracket (part number
RCKMNT-1RU=) to the switch. See
Figure
2-15.
Figure 2-1
to
Figure 2-15
Follow the same steps to attach the second bracket to the opposite side of the
switch.
Figure
2-4,
Figure
2-5, and
2-8, and
Figure
2-9.
Figure
2-10,
Figure
Figure
show how to attach a bracket to one side of the switch.
Chapter 2
Figure
2-1,
Figure
2-2, and
Figure
2-6.
2-11, and
Figure
2-13,
Figure
2-14, and
Installation
2-12.
78-11157-03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2950

Table of Contents