Removing Smart Board Software 8.X; To Create The Silent Removal File; To Remove Smart Board Software 8.X - Smart Technologies SMART Board Software 9.5 Installation Manual For System Administrators

Table of Contents

Advertisement

Removing SMART Board Software 8.x

SMART used the Install Shield installation utility to install SMART Board software versions 8.x. To
remove these versions of software silently, you must create a setup.iss file.
Before you can perform the following procedures, you must obtain the product code for your
version of SMART Board software. Refer to the following table for the ProductCode value to use
for these versions of software:
SMART Board
Software Version
8.0.0
8.0.1
8.1.0
8.1.1
8.1.2
8.1.3
8.1.4
NOTE: Include the braces—"{" and "}"—when using a ProductCode in the following commands.

To create the silent removal file

You only need to create the initial setup.iss file once. You can then use this setup.iss file to
remove the same version of SMART Board software from other computers on your network.
1. Check the version of SMART Board software that are installed on your computers. Refer to the
table above to identify the product code you must use in the following commands.
2. Click Start > Run and type CMD into the Open field.
A DOS window opens.
3. Type
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /MProductCode /l1033 /r /z-AddRemove -RemoveReg
and click OK.
This command removes the SMART Board software and creates a setup.iss file in the root of
the Windows folder.
4. Place the setup.iss file on a network server where all computers can access it.

To remove SMART Board software 8.x

1. Go to each computer and click Start > Run and type CMD into the Open field.
A DOS window opens.
2. Type
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /MProductCode /l1033 /s /z-AddRemove -RemoveReg /
f1"path to the setup.iss file\setup.iss" /f2"destination path for the
uninstall log file\uninst.log"
and click OK.
Silent Removal of Earlier SMART Board Software Versions
ProductCode
{7823065C-AA64-425D-A9A3-18BF7B99E944}
{F414173A-7BE1-46C6-811A-51277A4D9E7B}
{155FBC4E-CF09-4698-961B-DF9787E6B8B8}
{7AD771BB-B681-4659-B7FA-223FCB1FDF56}
{55C574CA-8D71-46F1-9897-98DAE55C0394}
{10D2A154-D221-4455-8426-E67D12C092F9}
{41CEFD25-0D33-44EA-A19C-5A1EBABFC041}
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMART Board Software 9.5 and is the answer not in the manual?

Questions and answers

Table of Contents