Smart Technologies AirLiner WS100 Installation And User Manual page 20

Tips and cautions on recharging the battery
• Turn off the AirLiner slate when you're not working with it.
• Recharge the battery to ensure that some charge remains for when you next use the slate.
NOTE: A built-in protection circuit prevents the battery from overcharging.
CAUTION
• Do not drain the battery's charge before you recharge it.
CAUTION
To avoid damaging the AirLiner slate battery, recharge it when the following reminders appear:
• When the battery charge falls below 20%, a notification area balloon tip appears
(Windows operating systems only). You should connect the slate to a power outlet.
• When the AirLiner slate battery charge is nearly empty, the power indicator
slate slowly flashes blue. You must connect the slate to a power outlet before you can
continue using it.
IMPORTANT
12
• If the AirLiner slate battery charge is low, and you will not use the slate for a
few days, fully recharge the battery first.
• If you will not use the AirLiner slate for a month or longer, fully recharge the
battery and remove it from the slate.
Recharge the battery as often as possible, so that it does not lose all of its
charge. A battery that has lost all of its charge can no longer be recharged.
If the battery charge is nearly empty, connect the slate to a power outlet to
avoid draining the battery completely. The AirLiner slate continues to draw a
small amount of battery charge, even when it is turned off.
Installing the Slate
on the
99-00666-20 B0