Smart Technologies AirLiner WS100 Installation And User Manual page 17

To recharge the battery
The AirLiner slate power adapter is composed of two parts: the power supply and the power cable.
Before you begin, connect the power cable to the power supply.
1. Insert the power adapter's round connector into the DC IN receptacle located on the right side
of the AirLiner slate.
DC IN Receptacle
2. Insert the power adapter's pronged connector into a power outlet.
The battery starts recharging as soon as you connect the AirLiner slate to a power outlet, and
the charging indicator located on the top right corner of the slate turns either green or orange.
A green light indicates that the battery is fully charged, and an orange light indicates that it is
recharging.
TIP
99-00666-20 B0
You don't have to turn on the AirLiner slate to recharge its battery.
Installing the Slate
Charging Indicator
9