External Communications-Building Management Systems, Liebert Sitescan; Figure 30 Liebert Vnsa With Optional Remote Large Display - Liebert iCOM User Manual

Intelligent communications & monitoring system

Hide thumbs Also See for Liebert iCOM:

Table of Contents

12"

(305mm)

5.4

External Communications—Building Management Systems, Liebert SiteScan

Liebert iCOM is capable of communicating with external monitoring systems, such as Building Man-

agement Systems (BMS), Network Monitoring Systems (NMS), Liebert's SiteScan

others.

Each Liebert iCOM-controlled cooling unit is equipped with Liebert IntelliSlot plug-in slots for use

with optional communication cards:

• Ethernet Web/SNMP Card

• RS-485 Modbus Card

The hot-swappable plug-in cards provide interfaces supporting open protocols, including Modbus,

HTTP (Web) and SNMP. See the Liebert Web site for the latest supported protocols, Modbus refer-

ence information and SNMP MIB's.

An alternative, limited method of communicating with an existing Liebert SiteScan Web monitoring

system is via twisted-pair cables connected to terminals 77 and 78 on the cooling unit terminal strip.

To use this method, the Liebert IntelliSlot power supply connection to P65 on the iCOM I/O board

must be unplugged, and the factory-supplied 77-78 cable must be connected to P65 (follow Liebert

SiteScan instructions for further connections). The appropriate Liebert iCOM control parameters will

also need to be configured to utilize the terminals.

NOTE

Liebert SiteScan will be limited to legacy parameters when communicating via terminals 77

and 78.

3.298"

(84mm)

14.25"

(362mm)

Installing a Liebert iCOM Unit-to-Unit Network

DPN001136

Rev. 0

Web system and

Table of Contents

Show Quick Links

Table of Contents