Figure 4-6: Wall-Mount Slots - Linksys WRTSL54GS User Manual

Wireless-G Media Storage Link Router with SpeedBooster
2. Drill two holes into the wall. Make sure adjacent holes are 2.36 inches (60 mm) apart.
3. Insert a screw into each hole, and leave 0.2 inches (5 mm) of its head exposed.
4. Maneuver the Router so the wall-mount slots line up with the two screws.
2.36 inches
(60 mm)
5. Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the wall-
mount slots.
Now that the hardware installation is complete, proceed to "Chapter 5: Configuring the Wireless-G
Media Storage Link Router," for directions on how to configure the Router.

Figure 4-6: Wall-Mount Slots

Chapter 4: Connecting the Wireless-G Media Storage Link Router 11
Placement Options