Completing Your Installation With Or Without A Bowl Light Fixture - Hunter 21313 Owner's Manual And Installation Manual

7 • Completing Your Installation With or Without a Bowl Light Fixture
Your Hunter fan comes with an integrated light fixture assembly and
an optional switch housing cap and plug button. This feature gives
you the option of installing the fan with OR without the included light
fixture. The steps below direct you whether or not you are installing a
light fixture.
Note: This fan is to be installed ONLY with the enclosed light kit. Use of
another light kit will result in improper performance of the fan and will void
the warranty.
WARNING: Use only the light fixture supplied with this fan model.
CAUTION: Make sure the upper switch housing is securely
attached to the switch housing mounting plate. Failure to properly
attach and tighten all three assembly screws could result in the
switch housing and light fixture falling.
If you want to install the light fixture, proceed with Step 7-1
now.
If you do not want to install the light fixture, you need to
uninstall it now. See "Uninstalling the Light Fixture" on Step 7-9.
Once you have uninstalled the light fixture, continue with Step
7-1.
12
42666-01 • 06/16/10 • Hunter Fan Company