Router Maintenance & Monitoring; Reset Your Router To Factory Defaults; Router Default Settings - TRENDnet TEW-812DRU User Manual

TRENDnet User's Guide
2. Click Connect to connect your computer to the scanner.
3. Once your computer is connected, you can receive scanned files from the scanner.
4. After you have finished printing, click Disconnect, to make the scanner available to
other computers on your network that use the scanner.
Router Maintenance & Monitoring

Reset your router to factory defaults

Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
"Backup and restore your router configuration
There are two methods that can be used to reset your router to factory defaults.
• Reset Button – Located on the side panel of your router, see
Features" on page 5. Use this method if you are encountering difficulties with
accessing your router management page.
OR
• Router Management Page
© Copyright 2013 TRENDnet. All Rights Reserved.
settings" on page 48.
"Product Hardware
1. Log into your router management page (see
on page 26).
2. Click on Administrator and click on Settings Management.
3. Under Load Factory Default, click Load Default. When prompted to confirm this
action, click OK.

Router Default Settings

Administrator User Name
Administrator Password
Router IP Address
Router Subnet Mask
DHCP Server IP Range
Wireless 2.4GHz
Wireless 2.4GHz Encryption
Wireless 5Ghz
Wireless 5GHz Encryption
TEW-812DRU
"Access your router management
admin
admin
192.168.10.1
255.255.255.0
192.168.10.100-192.168.150
Enabled
Please refer to wireless sticker or
device label
Enabled
Please refer to wireless sticker or
device label
page"
47