Step 6: Setting The Date And Time - Sony DVD653E - PAL DVD Camcorder Service Manual

Step 6: Setting the date and time

Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [ CLOCK SET]
screen appears every time you turn on your
camcorder or slide the POWER switch
down.
• If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p.111).
Skip to step 4 when you set the clock for
the fi rst time.
1
 [SETUP].
Touch
2
Select TIME/LANGU. with
, then touch
3
Select [CLOCK SET] with
then touch .
POWER switch
/
.
/ ,
4
Select the desired geographical
area with /
5
Set [DST] or [ SUMMERTIME] to
[ON] with
/
then touch .
CLOCK SET
AREA26
New York , Bogota
OFF
DST
DATE
2005Y JANM
6
Set [Y] (year) with
touch .
You can set any year up to the year
2079.
CLOCK SET
AREA26
New York , Bogota
DST OFF
DATE
2005Y JANM
7
Set [M] (month), [D] (day), hour
and minute, then touch
The clock starts.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
Refer to page 106 for information concerning
•
"World time difference."
Instead of [DST], [SUMMERTIME] is
•
displayed for some models.
, then touch .
, if necessary,
– : – – : – –
GMT -5.0
1D 12: 00 AM
OK
, then
/
– : – – : – –
GMT -5.0
1D 12: 00 AM
OK
.
23