Troubleshooting (continued)
[Cannot start Easy Handycam with USB connected] or [Cannot cancel Easy
Handycam with USB connected] appears on the screen of your camcorder.
You cannot start or cancel the Easy Handycam operation while the USB cable is connected.
•
Disconnect the USB cable from your camcorder fi rst.
You cannot transfer image data from your camcorder to a computer.
Set [USB speed] to [FULL SPEED] in setup item.
•
The images or sound of your camcorder cannot be played back correctly.
When you connect your camcorder to a computer not compatible with Hi-Speed USB (USB
•
2.0), it may not be able to be played back correctly. However, it does not effect to the images
or sounds transferred to your computer.
When you set the [USB SPEED] to [FULL SPEED], it may not be able to be played back
•
correctly. However, it does not effect to the images or sounds transferred to your computer.
Depending on the computer you use, the played back image or sound may stops temporarily,
•
but this does not effect the images or sound transferred to your computer.
You cannot write data from your computer on a disc in your camcorder using
the USB cable.
The disc is not compatible with your camcorder. Use a disc compatible with your camcorder
•
(p.13).
You cannot write data from other than the Picture Package on a disc in your camcorder.
•
Picture Package does not function correctly.
Close Picture Package, then restart the computer.
•
An error message appears while operating Picture Package.
Close Picture Package fi rst, then slide the POWER switch on your camcorder to turn on
•
another lamp.
The "First Step Guide" is not displayed correctly.
Refer to the PDF fi le of "First Step Guide" (FirstStepGuide.pdf). For details on copying pdf
•
fi le, see page 86.
100